This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the AT4053b is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments.
FEATURES
Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Direct-coupled, balanced output results in a clean signal even under high-output conditions
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Switchable 80 Hz hi-pass filter and 10 dB pad
Rugged turned-brass microphone housing for enduring dependability
State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica’s stringent consistency and reliability standards
SPECIFICATIONS
Element : Externally polarized (DC bias) capacitor
Polar Pattern : Hypercardioid
Frequency Response : 20 – 20.000 Hz
Low Frequency Roll Off : 80 Hz, 18 dB/octave
Open Circuit Sensitivity : -34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level : 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range : 129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio : 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements : 48V DC, 4.8 mA typical
Switches : Flat, roll-off; 10 dB pad (nominal)
Weight : 127g
Dimensions : 155.0 mm (6.10″) long, 21.0 mm (0.83″) maximum body diameter
![Rode M5 Matched Pair Condenser Microphone 10 Years Warranty [Made in Australia]](https://www.goodclearmusichub.com/wp-content/uploads/2026/09/rode-m5-matched-pair-condenser-microphone-10-years-warranty-made-in-australia.webp)
